LOADRDI: Loading data
 loading down-data ../dn/wh_dn000.000
 read 3211 ensemble and 20 bins 
 using RDI bottom track
 removed 46194 values because of low percent good
 loading up-data ../up/wh_up000.000
 read 3614 ensemble and 20 bins 
 removed 53143 values because of low percent good
 WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING 
 loadrdi: warning mean ping rate not equal between both instruments 
  mean down ping rate :3.5  mean up ping rate :3.6385
 loadrdi: warning instruments have no fixed ping rate 
  down dt for common ping number:3.1082  up dt :3.1208 hours 
 up instrument is different by 2 ensembles
 WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING 
 shifted timeseries by lag: 0 correlation: 0.90318
 shift ADCP timeseries by 0 ensembles
 number of joint ensembles is : 3198
 found 2 bad bottom error velocities and discarded them
 removed 33 values because of high error velocity
 removed 1 bottom values because of high error velocity
 extracting 2608 ensembles as profile
 removed 0 profiles due to larger tilt than 22
 removed 0 profiles due to larger tilt difference than 4
 multiply weight of bin 1 by  0.5
 Outlier discarded 1077 bins down looking
 Outlier discarded 1501 bins up looking
==> load data took 42 seconds
GETDEPTH: Integrating depth from vertical velocity
 starting run 1 to find bottom depth
 make soundspeed based on pressure and ADCP temp
 start depth correction from surface return: 4
 end depth correction from surface return: 9
 last depth from int W is :-28.6871
 should be                :5
 maximum depth from int W is :3464.6983
 should be                   :1628
  no bottom found
   given maximum profile depth : 1628
   extracted bottom depth      : 1691
        bottom depth error     : 26
 starting run 2 to find bottom depth
 start depth correction from surface return: -63
 end depth correction from surface return: -65
 last depth from int W is :-28.6871
 should be                :5
 maximum depth from int W is :1691.867
 should be                   :1628
  no bottom found
   given maximum profile depth : 1628
   extracted bottom depth      : 1693
        bottom depth error     : 27
 removing 2613 values  below recognized bottom
 make soundspeed based on pressure and ADCP temp
 correct velocities for sound speed 
==> get depth took 6 seconds
PREPINV: prepare data for inversion, form Super-Ensembles
 average profiles over (p.avdz) 20 meter
 mean compass offset is -84.8073 deg
 will not correct for sound speed twice
 remove reference velocity and average ensembles 
 Outlier discarded 100 bins down looking
 Outlier discarded 97 bins up looking
 reduced ensemble size is 150
GETINV:  compute best velocity profile
 vertical resolution (ps.dz) is 20 [m]
 smooth Ocean velocity profile
 found 4 ill constrained elements
 smooth CTD velocity profile
 no bottom track data
 add barotropic constrain
 ready for inversion  length of d : 2071
           (CTD vel)  length of A1:150
         (ocean vel)  length of A2:87
Cholesky transform
 give low weight to 1% of data scan#:1
==> prep inversion took 13 seconds
GETINV:  compute best velocity profile
 vertical resolution (ps.dz) is 20 [m]
 smooth Ocean velocity profile
 found 4 ill constrained elements
 smooth CTD velocity profile
 found 1 ill constrained elements
 no bottom track data
 add barotropic constrain
 ready for inversion  length of d : 2052
           (CTD vel)  length of A1:150
         (ocean vel)  length of A2:87
Moore-Penrose inverse
 solve only down trace
 smooth Ocean velocity profile
 found 10 ill constrained elements
 smooth CTD velocity profile
 found 1 ill constrained elements
Cholesky transform
 solve only up trace
 smooth Ocean velocity profile
 found 4 ill constrained elements
 smooth CTD velocity profile
Cholesky transform
==> inversion took 2 seconds
GETSHEAR2: average shear profile over (ps.dz) 20 [m]
 maximum std (stdf) 2 of data 
 minimum weight  0.6 of data 
 increased error because of shear - inverse difference
 save results 
install NETCDF libary to get the netcdf LADC archive output